Flux Battery Hub
Automatic Battery Electrode Cutting Machine | Roll-to-Sheet
Automatic Battery Electrode Cutting Machine | Roll-to-Sheet
SKU:FL-HQ300-110V
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This automatic battery electrode cutting machine converts coated cathode and anode rolls into individual sheets using transverse, cut-to-length cutting. Automatic unwinding, tension control and servo feeding support repeatable electrode sheet preparation, with 300 mm and 400 mm web-width configurations for laboratory and pilot-scale workflows.

Automatic Roll-to-Sheet Electrode Cutting
- Set cutting length, quantity and speed through a PLC and HMI control system.
- Choose continuous fixed-length cutting or registration-mark tracking for compatible marked electrode webs.
- Automatic unwinding with an air-expanding shaft simplifies roll loading and controls feed tension.
- Adjust front and rear cutting compensation for multi-section cutting requirements.
Technical Specifications
| Parameter | 300 mm configuration | 400 mm configuration |
|---|---|---|
| Model / SKU family | FL-HQ300 | FL-HQ400 |
| Electrode web width | 10–300 mm | 10–400 mm |
| Programmable cutting length | 1–9,999 mm | 1–9,999 mm |
| Maximum unwind roll diameter | 250 mm | 380 mm |
| Fixed-length feed / cutting speed | 5–250 mm/s | 5–250 mm/s |
| Registration-mark tracking speed | 5–150 mm/s | 5–150 mm/s |
| Cutting accuracy | ±0.3 mm within the specified adjustment range | ±0.3 mm within the specified adjustment range |
| Specified burr height | ≤25 µm | ≤25 µm |
| Unwinding | Air-expanding shaft; automatic unwinding with constant tension | Air-expanding shaft; automatic unwinding with constant tension |
| Controls | PLC + HMI; servo fixed-length feed and color-mark sensor | PLC + HMI; servo fixed-length feed and color-mark sensor |
| Compressed air | 0.5–0.8 MPa | 0.5–0.8 MPa |
| Rated power | 1.2 kW | 1.2 kW |
| Power supply (factory choice) | AC 220V / 50Hz or AC 110V / 60Hz | AC 220V / 50Hz or AC 110V / 60Hz |
| Machine body (L × W × H) | 700 × 700 × 1,000 mm | 800 × 800 × 1,000 mm |
| Approximate weight | 240 kg | 260 kg |
Speed values are linear feed / cutting speeds, not sheets per minute. Actual throughput, burr height and accuracy depend on electrode thickness, coating condition, material and setup. Confirm sample-cutting requirements before ordering. A compatible compressed-air supply is required.
Installation space must include the guide plate and access for roll loading and maintenance. Confirm the complete installation footprint in the quotation. Select one factory power configuration; this machine is not automatically switching dual voltage.
Choosing the Right Electrode Cutting Machine
Select the 300 mm version for electrode webs up to 300 mm wide, or the 400 mm version for wider webs and rolls up to 380 mm outside diameter. Provide total coated thickness, web width, roll diameter, required sheet length and registration-mark details so we can confirm the appropriate setup.
Cross Cutting vs. Slitting
Cross cutting determines the length of individual electrode sheets. Longitudinal slitting divides a web or sheet into narrower strips. This is a roll-to-sheet cutter, not a shaped-electrode die cutter or a coin-cell disc punch. For strip preparation, compare our electric electrode slitting machine and roll-to-roll electrode slitting machine.
Select a Configuration for Your Quote
Request a Quote
Send your electrode material, coated thickness, web width, roll size, target sheet dimensions, required output, preferred power supply and destination country. We will confirm the cutting configuration and provide a quotation by email.
Explore more battery cell making equipment and tools.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Automatic Battery Electrode Cutting Machine | Roll-to-Sheet
SKU: FL-HQ300-110V
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...