Flux Battery Hub
Cylindrical Cell Negative Tab Bottom Spot Welder
Cylindrical Cell Negative Tab Bottom Spot Welder
SKU:FL-DH650
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This cylindrical cell bottom spot welder uses single-needle AC pulse welding to join the negative current collector tab to the inside bottom of a cylindrical battery can. Designed for cell fabrication and research, it combines a microcomputer controller, adjustable welding parameters and pneumatic electrode actuation.

Key Features
- Single-needle welding of the negative tab to the cylindrical cell can bottom.
- Microcomputer-controlled single, double and multiple welding pulses.
- Digital parameter settings and independently adjustable welding needle pressure.
- Foot-operated pneumatic actuation for the welding operation.
Technical Specifications
| Model / SKU | FL-DH650 |
|---|---|
| Welding method | AC pulse, single-needle bottom welding |
| Application | Negative tab to cylindrical cell can bottom |
| Maximum output power | 1,000 W |
| Welding current setting | 00–99 (controller setting; not amperes) |
| Power supply | AC 220 V ±10%, 50–60 Hz |
| Air inlet pressure | 0.1–0.7 MPa |
| Applicable welding sheet thickness | 0.03–0.25 mm |
| Dimensions (L × W × H) | 400 × 560 × 400 mm |
| Approximate weight | 45 kg |
Confirm cell format, can and tab materials, welding needle reach, sheet thickness and fixture compatibility before ordering. The 00–99 controller value is a setting scale, not a measured current in amps. Welding performance depends on materials and process settings; validate weld strength and cell integrity for your application.
How Bottom Tab Welding Works
The negative current collector tab is positioned inside the cell can. A welding needle reaches through the center of the wound cell to the bottom, where an AC pulse weld joins the tab to the can. The operator uses the foot control to actuate the welding head. Follow equipment safety instructions and keep hands clear of the welding area and moving parts.
Request a Quote
Send your cell diameter and height, tab and can materials, tab thickness, needle reach, intended supply voltage, quantities and destination so we can confirm the configuration and provide a quotation.
Related Equipment
Explore our cylindrical cell preparation equipment and cell making equipment and tools.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Cylindrical Cell Negative Tab Bottom Spot Welder
SKU: FL-DH650
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...