Skip to product information
1 of 1

Flux Battery Hub

Electric Coin Cell Crimping Machine for CR20XX Cells

Electric Coin Cell Crimping Machine for CR20XX Cells

SKU:FL-DF160

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

This electric coin cell crimping machine seals CR2016, CR2025 and CR2032 laboratory cells using an electrically driven press and a standard CR20-series crimping die. Touchscreen operation and a digitally adjustable crimping load reduce manual pressing effort for battery materials research, sample preparation and small-batch trials.

Electric coin cell crimping machine with touchscreen, guide columns and CR20-series die — representative illustration
Representative equipment illustration adapted from the product reference. Final tooling and configuration are confirmed in the quotation.

Key Features

  • Electric drive with touchscreen parameter setting.
  • Digitally displayed and adjustable crimping load, up to 1,200 kgf.
  • Standard crimping tooling for CR2016, CR2025 and CR2032 cases.
  • Compact steel-frame construction with a 250 × 185 mm footprint.
  • Optional die configurations for additional cell sizes or disassembly.

Technical Specifications

Parameter Specification
Model / SKU FL-DF160
Drive Electric
Controls Touchscreen; digital crimping-load setting and display
Maximum crimping force 1,200 kgf (approximately 11.77 kN)
Crimping stroke 20 mm
Standard die compatibility CR2016, CR2025 and CR2032 coin cell cases
Optional tooling CR2430 / CR2450 crimping configurations and disassembly tooling — specify when requesting a quote
Rated power 100 W
Power supply Single-phase AC 220V / 50Hz or AC 110V / 60Hz — select one factory version
External dimensions (L × W × H) 250 × 185 × 450 mm
Equipment weight 20 kg

The 1,200 kgf figure is maximum pressing force, not pressure per unit die area or the recommended setting for every case. Select and validate the load for the actual shell, gasket and internal stack. Crimp quality and leakage performance depend on component fit, alignment and the selected process; no universal leak-rate guarantee is implied.

Select Power Supply

Choose the factory electrical version, then use Request a Quote. The same standard CR20-series crimping configuration applies to both options.

Standard and Optional Die Configurations

The standard configuration includes CR20-series sealing tooling for CR2016, CR2025 and CR2032. CR2430 and CR2450 require the appropriate optional tooling or tooling components. Disassembly tooling is optional and is not included in the standard crimping configuration. Send the case drawing and target cell format so the die arrangement can be confirmed before ordering.

Other pressing tasks, such as powder compaction, forming or riveting, require a separately qualified die and process. They are not standard included functions, and no pellet size or compaction specification is offered without configuration confirmation.

Glovebox Installation and Operation

The compact unit can be considered for glovebox use. For transfer through a nominal Ø360 mm antechamber, check the actual clear bore, transfer length, internal tray or obstructions, handling orientation and any required tooling removal against the 250 × 185 × 450 mm machine. Do not assume upright passage or compatibility with every glovebox. Confirm electrical feedthroughs and atmosphere suitability for the installation.

Use the selected factory electrical version; 220V / 50Hz and 110V / 60Hz are alternatives, not an automatically switching dual-voltage input. A trained operator should keep hands clear of the die, guide columns and moving plate. Switch off and disconnect power before die changes or maintenance, and return the moving plate to its initial position before shutdown. Keep guides and die faces clean, lubricate moving parts as appropriate, and inspect fasteners regularly. Use only cleaning and lubrication methods compatible with the cell chemistry and glovebox environment.

Related Coin Cell Assembly Products

Compare the manual hydraulic coin cell crimper if manual pressing is preferred. Prepare electrode and separator discs with the manual coin cell disc punch, and review CR20-series stainless-steel case sets. Confirm case and die compatibility rather than assuming all nominally identical cells use the same tooling. Browse coin cell preparation equipment for the wider assembly workflow.

Request a Quote

Send your cell format, shell and gasket details, required die options, preferred electrical version, glovebox transfer constraints, quantity and delivery destination. We will confirm the configuration and provide pricing in a written quotation.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Electric Coin Cell Crimping Machine for CR20XX Cells
SKU: FL-DF160

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.