Flux Battery Hub
Pneumatic Electrode Die Cutter for Pouch Cell Preparation
Pneumatic Electrode Die Cutter for Pouch Cell Preparation
SKU:FL-QMQ85
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This compact pneumatic electrode die cutter shapes individual cathode and anode sheets for laboratory pouch cell preparation. A replaceable cutting die defines the electrode outline, while four guide posts align the moving tooling. The maximum cutting size is 120 × 80 mm, with standard cathode and anode dies of 56 × 43 mm and 58 × 45 mm.

Sheet-Fed Electrode Cutting for Pouch Cell Research
- Pneumatic single-sheet punching with replaceable dies.
- Four-post guidance for tooling alignment and smooth movement.
- Compact dimensions for glovebox installation, subject to access and utility checks.
- Feed-opening safety light curtain and protective enclosure.
- Custom electrode outlines can be specified during quotation.
Technical Specifications
| Model / SKU | FL-QMQ85 |
|---|---|
| Maximum cutting size (L × W) | 120 × 80 mm |
| Standard cathode die | 56 × 43 mm |
| Standard anode die | 58 × 45 mm |
| Custom tooling | Available by quotation; submit electrode and tab drawings |
| Cutting accuracy | ±0.1 mm |
| Vertical burr limit | ≤12 µm |
| Horizontal burr limit | ≤20 µm |
| Maximum cutting force | 1 metric ton-force at 0.5 MPa compressed gas |
| Recommended electrode cutting force | 500 kgf |
| Die stroke | 35 mm |
| Gas supply pressure | 0.5 MPa |
| Guide structure | Four guide posts |
| Pneumatic components | Airtac |
| Dimensions (L × W × H) | 375 × 217 × 317 mm |
| Net weight | 32 kg |
Cutting accuracy and burr limits depend on electrode material, thickness, coating, tooling condition and setup. Confirm acceptance criteria with representative electrode samples. The 120 × 80 mm cutting size is not the standard die size; confirm the complete outline, including any tab projection, in the tooling drawing. Cutting force is distinct from the 0.5 MPa gas supply pressure.
Glovebox Installation and Utility Requirements
For operation inside a glovebox, use a drive gas consistent with the glovebox atmosphere. Check the 375 × 217 × 317 mm machine envelope, transfer-port clearance, working space and gas connections before purchase. The cutting drive is pneumatic; confirm electrical connections for the safety light curtain and protection devices in the quotation. Do not assume that the complete machine requires no electricity.
Operation and Maintenance
Position one electrode sheet in the die-cutting area, actuate the start valve and remove the cut electrode after the tooling cycle is complete. Keep hands clear of the die, guide posts and moving parts. Operate with one trained operator and keep the guards and safety devices in service. Clean tooling and guides, lubricate guide-post moving parts as directed and inspect fasteners regularly. Protect exposed moving surfaces against corrosion during extended storage.
Related Pouch Cell Preparation Equipment
For upstream strip preparation, explore our roll-to-roll battery electrode slitting machine. For circular coin-cell discs, use the separate manual coin cell electrode disc punch. Browse pouch cell preparation equipment for the wider laboratory workflow. These are separate tools; an integrated production line is not included.
Request a Quote
Send your electrode and tab drawing, material, sheet thickness, coating details, required cathode and anode dimensions, preferred die sets, glovebox requirements, quantity and delivery country. We will confirm tooling, utility connections, configuration and pricing by email.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Pneumatic Electrode Die Cutter for Pouch Cell Preparation
SKU: FL-QMQ85
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...