Skip to product information
1 of 1

Flux Battery Hub

Bottom-Heated Vacuum Film Coater for Battery Electrodes

Bottom-Heated Vacuum Film Coater for Battery Electrodes

SKU:FL-DTM260

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

This bottom-heated vacuum film coater applies battery electrode slurry to sheet substrates using a motor-driven adjustable film applicator. Its heated aluminum vacuum plate holds the substrate during coating and supports controlled drying for battery materials and thin-film research.

Bottom-heated vacuum film coater illustration
Equipment illustration; final panel and configuration may vary.

Key Features

  • Bottom-heated aluminum vacuum plate with digital temperature control and drying timer.
  • Adjustable coating stroke and speed for laboratory sheet coating.
  • 100 mm adjustable film applicator included as standard.
  • Suitable for battery-material, ceramic and other thin-film research.

Technical Specifications

SKU / model FL-DTM260
Heating arrangement Bottom-heated vacuum plate
Heating range Room temperature to 130 °C
Temperature control accuracy ±1 °C
Coating speed 0–120 mm/s adjustable, stated for lithium iron phosphate slurry
Adjustable stroke 0–250 mm
Vacuum plate dimensions (L × W × H) 365 × 200 × 32 mm
Standard applicator width 100 mm
Doctor blade gap adjustment 0–3.5 mm; stated adjustment accuracy 0.01 mm
Power supply AC 220 V / 50 Hz or AC 110 V / 60 Hz; select one factory configuration when ordering (not automatically switching dual voltage)
Dimensions (L × W × H) 500 × 350 × 320 mm
Approximate weight 50 kg

The blade gap is not the same as final dry-film thickness. Confirm coating width, slurry compatibility, vacuum source and included accessories before ordering. Heating and drying conditions should be validated for the substrate and solvent used.

Typical Electrode Coating Workflow

Secure the substrate on the vacuum plate, position the applicator and slurry, then run the coating stroke. Remove the applicator and push rod before setting the drying temperature and time. Follow the equipment instructions and appropriate solvent-handling procedures.

Request a Quote

Tell us your substrate and slurry, required coating width and length, drying temperature, electrical requirements, vacuum supply, quantity and delivery destination so we can confirm the configuration.

Related Equipment

Compare the automatic film coater with vacuum plate, film coater with drying heater, and battery cell making equipment.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Bottom-Heated Vacuum Film Coater for Battery Electrodes
SKU: FL-DTM260

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.