Flux Battery Hub
Bottom-Heated Vacuum Film Coater for Battery Electrodes
Bottom-Heated Vacuum Film Coater for Battery Electrodes
SKU:FL-DTM260-110V
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This bottom-heated vacuum film coater applies battery electrode slurry to sheet substrates using a motor-driven adjustable film applicator. Its heated aluminum vacuum plate holds the substrate during coating and supports controlled drying for battery materials and thin-film research.

Key Features
- Bottom-heated aluminum vacuum plate with digital temperature control and drying timer.
- Adjustable coating stroke and speed for laboratory sheet coating.
- 100 mm adjustable film applicator included as standard.
- Suitable for battery-material, ceramic and other thin-film research.
Technical Specifications
| SKU / model | FL-DTM260 |
|---|---|
| Heating arrangement | Bottom-heated vacuum plate |
| Heating range | Room temperature to 130 °C |
| Temperature control accuracy | ±1 °C |
| Coating speed | 0–120 mm/s adjustable, stated for lithium iron phosphate slurry |
| Adjustable stroke | 0–250 mm |
| Vacuum plate dimensions (L × W × H) | 365 × 200 × 32 mm |
| Standard applicator width | 100 mm |
| Doctor blade gap adjustment | 0–3.5 mm; stated adjustment accuracy 0.01 mm |
| Power supply | AC 220 V / 50 Hz or AC 110 V / 60 Hz; select one factory configuration when ordering (not automatically switching dual voltage) |
| Dimensions (L × W × H) | 500 × 350 × 320 mm |
| Approximate weight | 50 kg |
The blade gap is not the same as final dry-film thickness. Confirm coating width, slurry compatibility, vacuum source and included accessories before ordering. Heating and drying conditions should be validated for the substrate and solvent used.
Typical Electrode Coating Workflow
Secure the substrate on the vacuum plate, position the applicator and slurry, then run the coating stroke. Remove the applicator and push rod before setting the drying temperature and time. Follow the equipment instructions and appropriate solvent-handling procedures.
Request a Quote
Tell us your substrate and slurry, required coating width and length, drying temperature, electrical requirements, vacuum supply, quantity and delivery destination so we can confirm the configuration.
Related Equipment
Compare the automatic film coater with vacuum plate, film coater with drying heater, and battery cell making equipment.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Bottom-Heated Vacuum Film Coater for Battery Electrodes
SKU: FL-DTM260-110V
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...