Flux Battery Hub
Ceramic Plunger Pump for Battery Electrolyte Filling
Ceramic Plunger Pump for Battery Electrolyte Filling
SKU:FL-ZYB-01
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
The FL-ZYB-01 is a ceramic plunger pump for battery electrolyte filling. Its single-outlet, valveless pump head dispenses measured doses for cell-assembly research and pilot work. Use the touchscreen to set the dose and stroke count, save recipes and configure suck-back between dispenses.
Choose your power configuration: 220 V / 50 Hz · 110 V / 60 Hz

Key Features
- Rotary reciprocating ceramic plunger meters liquid without an external switching valve in the pump head.
- Adjustable stroke volume and cycle count for single-stroke or multi-stroke dosing.
- Forward dosing, reverse draw, adjustable suck-back and cleaning modes.
- Standalone touchscreen operation; confirm interface details before integrating with a line controller.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model / SKU | FL-ZYB-01 (220 V); FL-ZYB-01-110V (110 V) |
| Pump type | Single-head, single-outlet rotary reciprocating positive-displacement plunger pump |
| Pump core material | Zirconia (ZrO₂) or alumina (Al₂O₃), according to configuration |
| Adjustable displacement | Up to 10,000 µL (10 mL) per stroke; confirm minimum usable dose for the selected head |
| Stated metering accuracy | Within 0.5%; validate with the actual liquid, dose and setup |
| Drive speed | 1–1,200 rpm, reversible |
| Controller | 4.3-inch touchscreen; stores up to 100 recipes |
| Tubing | PE or PTFE; inlet and outlet 6 mm ID × 8 mm OD |
| Nominal dispensing needle options | 2.5, 4.0 or 6.0 mm; confirm length and fit |
| Pump dimensions (L × W × H) | 201 × 125 × 147 mm |
| Controller dimensions (L × W × H) | 295 × 215 × 157 mm |
| Combined pump and controller weight | Approx. 7.3 kg |
| Electrical configuration | AC 220 V / 50 Hz standard or AC 110 V / 60 Hz optional; select one |
| Operating environment | 0–40 °C; relative humidity below 80% |
| Enclosure rating | IP31 |
Dose Calibration and Liquid Compatibility
The 10 mL limit is the displacement per stroke, not the total volume of a multi-stroke dose. Verify dispensed volume and repeatability at the actual setpoint before use. The minimum reliable dose and usable speed depend on the head, tubing, needle and liquid properties. Confirm compatibility for the complete wetted path, including tubing, fittings and needle; ceramic compatibility alone does not establish system compatibility.
This is a metering and dispensing station, not a vacuum filling or cell sealing system. For a separate post-fill wetting step, see the vacuum standing box for electrolyte wetting. Browse cylindrical cell preparation equipment for related stations.
Request a Quote
Provide the target dose, required repeatability, electrolyte type and operating temperature, needle and fixture requirements, site power and delivery destination. We can confirm the pump head, wetted materials and electrical configuration with the quotation.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Ceramic Plunger Pump for Battery Electrolyte Filling
SKU: FL-ZYB-01
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...