Skip to product information
1 of 1

Flux Battery Hub

Ceramic Plunger Pump for Battery Electrolyte Filling

Ceramic Plunger Pump for Battery Electrolyte Filling

SKU:FL-ZYB-01

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

The FL-ZYB-01 is a ceramic plunger pump for battery electrolyte filling. Its single-outlet, valveless pump head dispenses measured doses for cell-assembly research and pilot work. Use the touchscreen to set the dose and stroke count, save recipes and configure suck-back between dispenses.

Choose your power configuration: 220 V / 50 Hz · 110 V / 60 Hz

Ceramic plunger pump for battery electrolyte filling with touchscreen controller and dispensing stand
Representative illustration of the pump, touchscreen controller and dispensing setup. Confirm included fixtures and accessories with the quote.

Key Features

  • Rotary reciprocating ceramic plunger meters liquid without an external switching valve in the pump head.
  • Adjustable stroke volume and cycle count for single-stroke or multi-stroke dosing.
  • Forward dosing, reverse draw, adjustable suck-back and cleaning modes.
  • Standalone touchscreen operation; confirm interface details before integrating with a line controller.

Technical Specifications

Parameter Specification
Model / SKU FL-ZYB-01 (220 V); FL-ZYB-01-110V (110 V)
Pump type Single-head, single-outlet rotary reciprocating positive-displacement plunger pump
Pump core material Zirconia (ZrO₂) or alumina (Al₂O₃), according to configuration
Adjustable displacement Up to 10,000 µL (10 mL) per stroke; confirm minimum usable dose for the selected head
Stated metering accuracy Within 0.5%; validate with the actual liquid, dose and setup
Drive speed 1–1,200 rpm, reversible
Controller 4.3-inch touchscreen; stores up to 100 recipes
Tubing PE or PTFE; inlet and outlet 6 mm ID × 8 mm OD
Nominal dispensing needle options 2.5, 4.0 or 6.0 mm; confirm length and fit
Pump dimensions (L × W × H) 201 × 125 × 147 mm
Controller dimensions (L × W × H) 295 × 215 × 157 mm
Combined pump and controller weight Approx. 7.3 kg
Electrical configuration AC 220 V / 50 Hz standard or AC 110 V / 60 Hz optional; select one
Operating environment 0–40 °C; relative humidity below 80%
Enclosure rating IP31

Dose Calibration and Liquid Compatibility

The 10 mL limit is the displacement per stroke, not the total volume of a multi-stroke dose. Verify dispensed volume and repeatability at the actual setpoint before use. The minimum reliable dose and usable speed depend on the head, tubing, needle and liquid properties. Confirm compatibility for the complete wetted path, including tubing, fittings and needle; ceramic compatibility alone does not establish system compatibility.

This is a metering and dispensing station, not a vacuum filling or cell sealing system. For a separate post-fill wetting step, see the vacuum standing box for electrolyte wetting. Browse cylindrical cell preparation equipment for related stations.

Request a Quote

Provide the target dose, required repeatability, electrolyte type and operating temperature, needle and fixture requirements, site power and delivery destination. We can confirm the pump head, wetted materials and electrical configuration with the quotation.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Ceramic Plunger Pump for Battery Electrolyte Filling
SKU: FL-ZYB-01

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.