Skip to product information
1 of 1

Flux Battery Hub

Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film

Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film

SKU:FL-SCK200

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

This semi-automatic pouch cell cup forming machine shapes aluminum laminated film into battery pouch cases for lithium-ion laboratory research and process trials. Manual positioning of pre-cut film is combined with a powered forming stroke. Two machine sizes support different film formats, with replaceable dies and adjustable forming depth.

Semi-automatic pouch cell aluminum laminated film cup forming machine illustration
Equipment illustration; final configuration may vary. Use the specification table and approved tooling drawing for selection.

Compare Pouch Forming Configurations

Specification 200 configuration 300 configuration
Model FL-SCK200 FL-SCK300
Listed aluminum-laminated film size limit 140 × 120 mm, single-cavity configuration 220 × 180 mm
Forming depth Up to 6 mm Up to 6 mm
Reference production rate 100–200 pieces/hour 100–150 pieces/hour
Approximate dimensions (L × W × H) 460 × 320 × 925 mm 560 × 420 × 925 mm
Approximate weight 150 kg 250 kg

The listed film-size limits are not a guaranteed finished cavity size. Confirm the cavity drawing, edge margins, sealing flanges, corner radii and gas-bag layout before choosing the die. The FL-SCK200 double-cavity reference is 60 × 45 mm with a gas-bag arrangement; confirm precisely which dimensions the approved tooling drawing defines. This double-cavity reference is not specified for FL-SCK300.

Select Model and Power Supply

Select the configuration above, then use Request a Quote. The voltage/frequency options are factory alternatives, not an automatic dual-voltage input.

Technical Specifications

Film thickness 0.10–0.20 mm
Forming force rating 3 metric tons-force
Power supply AC 220V / 50Hz or AC 110V / 60Hz — select one factory version
Electrical power 100 W
Compressed-air pressure 0.5–0.7 MPa
Guidance Four guide columns
Tooling Replaceable forming die with adjustable forming depth
Upper/lower die flatness 0.02 mm
Die-core flatness 0.02 mm
Protection Safety light curtain, protective enclosure and electrical protection

Forming Die and Film Compatibility

Four guide columns align the tooling during forming, while replaceable dies support different pouch designs. Mirror-polished tooling surfaces and the specified die flatness support forming quality, but achievable depth and corner quality depend on film construction, thickness, cavity geometry and setup. The 6 mm depth and reference output rates are not guarantees for every film and cavity combination. Confirm forming results and acceptance criteria with representative film samples.

Provide film grade and thickness, blank dimensions, cavity length and width, required depth, corner radii, single- or double-cavity arrangement, sealing margins and gas-bag dimensions. Confirm included die sets and any custom tooling charges in the quotation. Final component brands and equivalent alternatives are confirmed in the configured quotation rather than promised as a fixed brand list.

Operation and Maintenance

Position the pre-cut film in the forming die, initiate the powered stroke and remove the formed pouch only after motion has stopped. Keep hands clear of the tooling and moving guides, use one trained operator and keep the light curtain and protective guards active. Isolate electrical and pneumatic supplies before maintenance.

Keep forming dies clean using a soft cloth and a cleaning method compatible with the tooling and film. Lubricate guide-post moving parts as directed and inspect fasteners regularly. Clean and protect exposed moving surfaces before extended storage.

Related Pouch Cell Assembly Equipment

Browse pouch cell preparation equipment, top and side heat sealing machines and vacuum pre-sealing machines for subsequent assembly steps. Cup forming shapes the pouch film; it does not perform electrolyte filling, vacuum sealing or battery formation cycling.

Request a Quote

Send your preferred model and electrical version, film specification, pouch and cavity drawing, forming depth, gas-bag layout, tooling requirements, target output, quantity and delivery country. We will confirm the configured machine, utilities, tooling and pricing by email.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film
SKU: FL-SCK200

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.