Flux Battery Hub
Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film
Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film
SKU:FL-SCK300
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This semi-automatic pouch cell cup forming machine shapes aluminum laminated film into battery pouch cases for lithium-ion laboratory research and process trials. Manual positioning of pre-cut film is combined with a powered forming stroke. Two machine sizes support different film formats, with replaceable dies and adjustable forming depth.

Compare Pouch Forming Configurations
| Specification | 200 configuration | 300 configuration |
|---|---|---|
| Model | FL-SCK200 | FL-SCK300 |
| Listed aluminum-laminated film size limit | 140 × 120 mm, single-cavity configuration | 220 × 180 mm |
| Forming depth | Up to 6 mm | Up to 6 mm |
| Reference production rate | 100–200 pieces/hour | 100–150 pieces/hour |
| Approximate dimensions (L × W × H) | 460 × 320 × 925 mm | 560 × 420 × 925 mm |
| Approximate weight | 150 kg | 250 kg |
The listed film-size limits are not a guaranteed finished cavity size. Confirm the cavity drawing, edge margins, sealing flanges, corner radii and gas-bag layout before choosing the die. The FL-SCK200 double-cavity reference is 60 × 45 mm with a gas-bag arrangement; confirm precisely which dimensions the approved tooling drawing defines. This double-cavity reference is not specified for FL-SCK300.
Select Model and Power Supply
- Select FL-SCK200 / AC 220V / 50Hz
- Select FL-SCK300 / AC 220V / 50Hz
- Select FL-SCK200 / AC 110V / 60Hz
- Select FL-SCK300 / AC 110V / 60Hz
Select the configuration above, then use Request a Quote. The voltage/frequency options are factory alternatives, not an automatic dual-voltage input.
Technical Specifications
| Film thickness | 0.10–0.20 mm |
|---|---|
| Forming force rating | 3 metric tons-force |
| Power supply | AC 220V / 50Hz or AC 110V / 60Hz — select one factory version |
| Electrical power | 100 W |
| Compressed-air pressure | 0.5–0.7 MPa |
| Guidance | Four guide columns |
| Tooling | Replaceable forming die with adjustable forming depth |
| Upper/lower die flatness | 0.02 mm |
| Die-core flatness | 0.02 mm |
| Protection | Safety light curtain, protective enclosure and electrical protection |
Forming Die and Film Compatibility
Four guide columns align the tooling during forming, while replaceable dies support different pouch designs. Mirror-polished tooling surfaces and the specified die flatness support forming quality, but achievable depth and corner quality depend on film construction, thickness, cavity geometry and setup. The 6 mm depth and reference output rates are not guarantees for every film and cavity combination. Confirm forming results and acceptance criteria with representative film samples.
Provide film grade and thickness, blank dimensions, cavity length and width, required depth, corner radii, single- or double-cavity arrangement, sealing margins and gas-bag dimensions. Confirm included die sets and any custom tooling charges in the quotation. Final component brands and equivalent alternatives are confirmed in the configured quotation rather than promised as a fixed brand list.
Operation and Maintenance
Position the pre-cut film in the forming die, initiate the powered stroke and remove the formed pouch only after motion has stopped. Keep hands clear of the tooling and moving guides, use one trained operator and keep the light curtain and protective guards active. Isolate electrical and pneumatic supplies before maintenance.
Keep forming dies clean using a soft cloth and a cleaning method compatible with the tooling and film. Lubricate guide-post moving parts as directed and inspect fasteners regularly. Clean and protect exposed moving surfaces before extended storage.
Related Pouch Cell Assembly Equipment
Browse pouch cell preparation equipment, top and side heat sealing machines and vacuum pre-sealing machines for subsequent assembly steps. Cup forming shapes the pouch film; it does not perform electrolyte filling, vacuum sealing or battery formation cycling.
Request a Quote
Send your preferred model and electrical version, film specification, pouch and cavity drawing, forming depth, gas-bag layout, tooling requirements, target output, quantity and delivery country. We will confirm the configured machine, utilities, tooling and pricing by email.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Semi-Automatic Pouch Cell Cup Forming Machine for Aluminum Laminated Film
SKU: FL-SCK300
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...