Skip to product information
1 of 1

Flux Battery Hub

Automatic Cylindrical Cell Sealing Machine

Automatic Cylindrical Cell Sealing Machine

SKU:FL-ZDFK700

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

The FL-ZDFK700 is an automatic cylindrical cell sealing machine for pilot-scale battery assembly. It automatically feeds prepared cells into a three-stage crimping sequence and discharges them after sealing. The standard tooling is for 18650 cases; 21700 and 26650 tooling can be quoted separately.

Automatic cylindrical cell sealing machine with PLC touchscreen and infeed tooling
Representative illustration of the automatic sealing station.

Key Features

  • Automatic infeed and discharge reduce manual handling at the sealing station.
  • PLC touchscreen for setting and monitoring the sealing sequence.
  • Three-stage crimping forms the case rim in successive steps.
  • Interchangeable die sets for matched cylindrical case and cap assemblies.

Technical Specifications

Parameter Specification
Model / SKU FL-ZDFK700
Control PLC with touchscreen
Cell handling Automatic infeed and discharge at the sealing station
Sealing sequence Three-stage crimping
Standard tooling 18650 cylindrical cell sealing die set
Optional tooling 21700 and 26650, subject to case and cap fit
Nominal throughput 6 cells/min; confirm with the selected tooling and parts
Nominal forming accuracy ±0.1 mm; confirm the measured feature and acceptance method
Standard electrical input AC 220 V / 50 Hz
Rated electrical power 100 W
Compressed-air supply 0.5–0.7 MPa
Installation dimensions and shipping weight Confirm with the final configuration and installation drawing

The compressed-air figure is the supply pressure, not the sealing force or pressure on the cell. Confirm crimp load, die life and acceptance criteria for the selected case and tooling.

Tooling and Line Integration

Cell format alone does not establish fit. Send the case and cap drawings, gasket dimensions, rim profile and any pre-groove requirements for tooling review. Confirm the infeed and discharge interface, finished crimp dimensions and leak-test criteria with actual parts before releasing the process. The sealing station does not replace upstream grooving, tab welding or electrolyte filling.

For single-cell bench work, compare the manual hydraulic 18650 crimper and pneumatic 18650 crimper. See 18650 case sets and verify fit before ordering, or browse cylindrical cell preparation equipment.

Request a Quote

Include the cell format, case and cap drawings, required tooling, target throughput, installation site and destination. Both electricity and compressed air are required. If you need AC 110 V / 60 Hz, request configuration confirmation before ordering.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Automatic Cylindrical Cell Sealing Machine
SKU: FL-ZDFK700

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.