Skip to product information
1 of 1

Flux Battery Hub

Cylindrical Cell Electrolyte Filling and Vacuum Standing Machine

Cylindrical Cell Electrolyte Filling and Vacuum Standing Machine

SKU:FL-ZY1865

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

The FL-ZY1865 is a cylindrical cell electrolyte filling and vacuum standing machine that dispenses first, then moves the fixture into the vacuum standing position. The PLC-controlled X/Y stage positions each cell below the fill needle, then transfers the filled cells to the chamber. The operator loads and unloads the fixture. Final cell sealing is a separate operation.

Cylindrical cell electrolyte filling and vacuum standing machine with touchscreen and cell fixture
Representative illustration of the cylindrical cell filling and vacuum standing station.

Technical Specifications

Parameter Specification
Model / SKU FL-ZY1865
Fixture positions 10; sequential filling
Cell formats 14450, 14500, 18650, 21700 or 4680 with matched tooling
Control PLC touchscreen; configurable fill count, dose and standing time
Nominal dosing accuracy ±1%; verify at the target dose and with the selected liquid
Chamber opening height 115 mm
Equipment dimensions (L × W × H) 640 × 400 × 725 mm
Approximate equipment weight 90 kg
Rated electrical power 500 W
Dispense mass Above 0.2 g per cell; adjustable. Confirm the usable dose with the actual electrolyte.
Dispense speed Nominal 3 mL/s, adjustable; maximum 6 mL/s
Vacuum reference Nominally around −98 kPa gauge; confirm reference and achieved pressure for the actual cycle
Timers Adjustable evacuation and vacuum standing times
Liquid tubing 6 mm nominal tubing; verify fittings and wetted materials
Standard power input AC 220 V / 50 Hz
Pneumatic supply Dry, filtered, regulated supply above approximately 0.39 MPa (4 kgf/cm²)

Fill First, Then Vacuum Stand

This model applies vacuum after electrolyte dispensing. If your process requires chamber evacuation before filling, see the vacuum-first electrolyte filling and standing system. For the separate closure step, see the automatic cylindrical cell sealing machine and confirm tooling independently.

If the process requires only one step, compare our ceramic plunger dosing pump or standalone vacuum standing box.

Request a Quote

Provide your cell drawing, target dose, fixture format, vacuum dwell, utility requirements and destination. Confirm the needle and fixture, packed dimensions, vacuum pump scope and compatible wetted materials. If your site requires AC 110 V / 60 Hz, request configuration confirmation. Check glovebox clearances, process gas and exhaust arrangement before ordering.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Cylindrical Cell Electrolyte Filling and Vacuum Standing Machine
SKU: FL-ZY1865

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.