Skip to product information
1 of 1

Flux Battery Hub

Manual Hydraulic Electrode Die Cutter for Battery Research

Manual Hydraulic Electrode Die Cutter for Battery Research

SKU:FL-XMQ100

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

This compact manual hydraulic electrode die cutter shapes battery cathode and anode sheets and can be configured for lithium-sheet cutting. A hand-operated hydraulic drive supplies up to 8 metric tons-force within a maximum cutting size of 120 × 100 mm. Its compact body supports laboratory and glovebox installation, subject to clearance, tooling and material-handling checks.

Manual hydraulic electrode die cutter with pressure gauge and hand lever, edited appearance reference
Edited appearance reference. Use the specification table and confirmed tooling drawing for technical selection, not the illustrated gauge reading.

Manual Hydraulic Cutting for Laboratory Electrodes

  • Hand-lever hydraulic operation without a powered drive or compressed-air supply.
  • Integrated pressure gauge for monitoring hydraulic pressure.
  • Adjustable relief valve and pressure-limit setting.
  • Four guide posts align the upper and lower tooling.
  • Replaceable dies support different electrode outlines.

Technical Specifications

Model / SKU FL-XMQ100
Drive type Manual hydraulic, hand-lever operated
Maximum cutting size 120 × 100 mm
Cutting accuracy ±0.1 mm
Maximum cutting force 8 metric tons-force
Die stroke 35 mm
Tooling Replaceable cutting die; specify geometry in quotation
Frame material High-strength chromium steel with plated and coated surfaces
Pressure control Integrated gauge, adjustable hydraulic relief valve and pressure limit
Dimensions (L × W × H) 223 × 170 × 325 mm
Net weight 25 kg

The 8-ton value is a maximum force rating, not a pressure value in MPa and not the recommended force for every material. Select the working force to suit the die, electrode and validated process. The maximum cutting envelope does not define an included standard die size; confirm the complete electrode outline, including any tabs, in the tooling drawing.

Electrode and Lithium-Sheet Applications

Use this hydraulic die cutter for individual cathode and anode sheets in pouch cell research. Lithium-sheet cutting requires tooling and handling conditions appropriate to the material. Confirm the sheet thickness, surface condition, die geometry and required atmosphere during quotation. Cutting accuracy and edge quality depend on the material, tooling condition and setup; burr-free or powder-free cutting is not guaranteed for every electrode.

Glovebox Installation

Check the 223 × 170 × 325 mm machine body, hand-lever operating clearance, transfer-port access and support capacity before installation. The manual hydraulic drive does not require an electrical supply or compressed-air connection. Inspect hydraulic seals and assess oil containment and cleanliness requirements before use in a controlled atmosphere. Glovebox compatibility does not remove the need for a material-specific safety procedure.

Operation and Tooling Care

Position the sheet in the die-cutting area, close the release valve as directed and operate the hand lever to apply cutting force. Release hydraulic pressure after cutting and remove the electrode only once the tooling has opened and movement has stopped. Keep hands clear of the die and guide posts, do not exceed the rated force and use only tooling matched to the machine and material.

Tool-life reference: at least 30,000 operations under normal use. Actual service life depends on material, die condition, loading and maintenance; confirm tooling-life acceptance terms in the quotation. Plated and coated frame surfaces are not a guarantee against corrosion in every environment.

Compare Electrode Die Cutting Options

For gas-driven sheet cutting, compare our compact pneumatic electrode die cutter. For larger cutting envelopes and semi-automatic operation, see the semi-automatic electrode die cutting machine. Browse pouch cell preparation equipment for related laboratory tools. These machines use different drives and cutting capacities; choose according to your electrode drawing and utility constraints.

Request a Quote

Send your cathode, anode or lithium-sheet drawing, material, thickness, required outline and tabs, desired die sets, glovebox requirements, quantity and delivery country. We will confirm tooling, configuration and pricing by email.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Manual Hydraulic Electrode Die Cutter for Battery Research
SKU: FL-XMQ100

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.