Flux Battery Hub
Semi-Automatic Electrode Die Cutting Machine for Pouch Cells
Semi-Automatic Electrode Die Cutting Machine for Pouch Cells
SKU:FL-MQ280
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This semi-automatic electrode die cutting machine shapes cathode and anode sheets for pouch cell battery research. Manual sheet loading is combined with infrared positioning and a booster-cylinder cutting stroke. Three machine sizes cover maximum cutting dimensions from 280 × 180 mm to 400 × 300 mm, with replaceable dies specified to your electrode drawing.

Choose an Electrode Cutting Size
| Specification | 280 configuration | 350 configuration | 400 configuration |
|---|---|---|---|
| Model / SKU | FL-MQ280 | FL-MQ350 | FL-MQ400 |
| Maximum cutting size | 280 × 180 mm | 350 × 250 mm | 400 × 300 mm |
| Machine dimensions (L × W × H) | 580 × 455 × 900 mm | 650 × 480 × 900 mm | 650 × 550 × 1,400 mm |
| Net weight | 120 kg | 120 kg | 240 kg |
Maximum cutting size is the available cutting envelope, not a supplied standard die size. Confirm the full electrode outline, tab projection, clearance and die layout before selecting a model. The 400 configuration has a taller frame and higher weight; check installation access and floor support.
Select a Model
Select a model, then use Request a Quote. State your chosen electrical version and tooling requirements in the form.
Key Features
- Infrared positioning helps align electrode sheets before cutting.
- Replaceable cutting dies support different cathode and anode outlines.
- Four-post guidance maintains upper and lower tooling alignment.
- Feed-opening safety light curtain and guards protect the work area.
- Semi-automatic stroke with manual feeding suits laboratory and process-development work.
Technical Specifications
| Operation | Semi-automatic, with manual sheet loading and removal |
|---|---|
| Positioning | Infrared positioning device |
| Cutting accuracy | ±0.1 mm |
| Vertical / horizontal burr limits | ≤15 µm / ≤20 µm |
| Booster cylinder force rating | 3 metric tons-force |
| Die stroke | 150 mm |
| Compressed-air pressure | 0.5–0.8 MPa |
| Rated electrical power | 100 W |
| Power supply | AC 220V / 50Hz or AC 110V / 60Hz — select one factory version |
| Reference output | 500–1,000 electrodes/hour; dependent on electrode size, tooling and handling |
| Standard pieces per cut | 1; configurations for 1–3 pieces depend on electrode size and tooling |
| Guidance | Four guide posts |
| Feed-opening protection | Safety light curtain and protective guards |
The two electrical versions are factory alternatives, not an automatic dual-voltage input. Both electrical power and compressed air are required. Cutting force is distinct from gas supply pressure. Actual output, cutting accuracy and burr results depend on electrode material, coating, thickness, die condition and loading method. Confirm performance and acceptance criteria with representative samples; the reference output is not a guaranteed production rate.
Die Configuration and Process Fit
Submit separate cathode and anode drawings, including active-area dimensions, foil extensions and tab geometry. Custom cutting dimensions and multi-piece die layouts require configuration review. The standard cutting arrangement is one piece per stroke; do not assume that three pieces per stroke are available for every electrode size.
This is a sheet-fed electrode shaping machine, not an automatic roll-fed die cutter or a tab-trimming machine. For smaller electrode outlines and a compact installation, compare our compact pneumatic electrode die cutter. For upstream roll-strip preparation, see our roll-to-roll battery electrode slitting machine. Browse pouch cell preparation equipment for the wider laboratory workflow.
Operation and Maintenance
Position the electrode sheet in the cutting area, initiate the cycle and remove the electrode only after motion has stopped. Use one trained operator, keep hands clear of the die and guide posts and keep all guards and safety devices active. Clean tooling and guides regularly, lubricate moving guide parts as directed and check fasteners. Protect exposed moving surfaces against corrosion during extended storage. Do not dismantle or adjust electrical and pneumatic assemblies without qualified personnel.
Request a Quote
Send your preferred model, cathode and anode drawings, material, thickness, coating details, target output, die requirements, chosen AC 220V/50Hz or AC 110V/60Hz supply, quantity and destination. We will confirm tooling, final component configuration, installation requirements and pricing by email.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Semi-Automatic Electrode Die Cutting Machine for Pouch Cells
SKU: FL-MQ280
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...