Skip to product information
1 of 1

Flux Battery Hub

Semi-Automatic Electrode Die Cutting Machine for Pouch Cells

Semi-Automatic Electrode Die Cutting Machine for Pouch Cells

SKU:FL-MQ400

  • Formal Quotes & POs
  • DDP to Most Destinations
  • Return Policy Available

This semi-automatic electrode die cutting machine shapes cathode and anode sheets for pouch cell battery research. Manual sheet loading is combined with infrared positioning and a booster-cylinder cutting stroke. Three machine sizes cover maximum cutting dimensions from 280 × 180 mm to 400 × 300 mm, with replaceable dies specified to your electrode drawing.

Semi-automatic pouch cell electrode die cutting machine, series appearance reference
Series appearance reference; edited product image. Final dimensions and configuration vary by model.

Choose an Electrode Cutting Size

Specification 280 configuration 350 configuration 400 configuration
Model / SKU FL-MQ280 FL-MQ350 FL-MQ400
Maximum cutting size 280 × 180 mm 350 × 250 mm 400 × 300 mm
Machine dimensions (L × W × H) 580 × 455 × 900 mm 650 × 480 × 900 mm 650 × 550 × 1,400 mm
Net weight 120 kg 120 kg 240 kg

Maximum cutting size is the available cutting envelope, not a supplied standard die size. Confirm the full electrode outline, tab projection, clearance and die layout before selecting a model. The 400 configuration has a taller frame and higher weight; check installation access and floor support.

Select a Model

Select a model, then use Request a Quote. State your chosen electrical version and tooling requirements in the form.

Key Features

  • Infrared positioning helps align electrode sheets before cutting.
  • Replaceable cutting dies support different cathode and anode outlines.
  • Four-post guidance maintains upper and lower tooling alignment.
  • Feed-opening safety light curtain and guards protect the work area.
  • Semi-automatic stroke with manual feeding suits laboratory and process-development work.

Technical Specifications

Operation Semi-automatic, with manual sheet loading and removal
Positioning Infrared positioning device
Cutting accuracy ±0.1 mm
Vertical / horizontal burr limits ≤15 µm / ≤20 µm
Booster cylinder force rating 3 metric tons-force
Die stroke 150 mm
Compressed-air pressure 0.5–0.8 MPa
Rated electrical power 100 W
Power supply AC 220V / 50Hz or AC 110V / 60Hz — select one factory version
Reference output 500–1,000 electrodes/hour; dependent on electrode size, tooling and handling
Standard pieces per cut 1; configurations for 1–3 pieces depend on electrode size and tooling
Guidance Four guide posts
Feed-opening protection Safety light curtain and protective guards

The two electrical versions are factory alternatives, not an automatic dual-voltage input. Both electrical power and compressed air are required. Cutting force is distinct from gas supply pressure. Actual output, cutting accuracy and burr results depend on electrode material, coating, thickness, die condition and loading method. Confirm performance and acceptance criteria with representative samples; the reference output is not a guaranteed production rate.

Die Configuration and Process Fit

Submit separate cathode and anode drawings, including active-area dimensions, foil extensions and tab geometry. Custom cutting dimensions and multi-piece die layouts require configuration review. The standard cutting arrangement is one piece per stroke; do not assume that three pieces per stroke are available for every electrode size.

This is a sheet-fed electrode shaping machine, not an automatic roll-fed die cutter or a tab-trimming machine. For smaller electrode outlines and a compact installation, compare our compact pneumatic electrode die cutter. For upstream roll-strip preparation, see our roll-to-roll battery electrode slitting machine. Browse pouch cell preparation equipment for the wider laboratory workflow.

Operation and Maintenance

Position the electrode sheet in the cutting area, initiate the cycle and remove the electrode only after motion has stopped. Use one trained operator, keep hands clear of the die and guide posts and keep all guards and safety devices active. Clean tooling and guides regularly, lubricate moving guide parts as directed and check fasteners. Protect exposed moving surfaces against corrosion during extended storage. Do not dismantle or adjust electrical and pneumatic assemblies without qualified personnel.

Request a Quote

Send your preferred model, cathode and anode drawings, material, thickness, coating details, target output, die requirements, chosen AC 220V/50Hz or AC 110V/60Hz supply, quantity and destination. We will confirm tooling, final component configuration, installation requirements and pricing by email.

View full details

Request a Lab Quote

For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.

Product: Semi-Automatic Electrode Die Cutting Machine for Pouch Cells
SKU: FL-MQ400

Submitting this form does not place an order or confirm availability, pricing or delivery. DDP shipping is included for most destinations we serve. Remote, restricted or unsupported destinations may require different terms, which we will confirm before fulfillment.