Flux Battery Hub
Vacuum Electrolyte Filling and Standing Machine
Vacuum Electrolyte Filling and Standing Machine
SKU:FL-ZYJZ200
- Formal Quotes & POs
- DDP to Most Destinations
- Return Policy Available
This vacuum electrolyte filling and standing machine evacuates the chamber before dispensing electrolyte, then runs a timed standing cycle for wetting. The operator loads and unloads the fixture and indexes it by hand between successive fills. PLC touchscreen control runs the chamber and dosing sequence. It does not seal cells.
Choose a model: 7 Positions — FL-ZYJZ200 · 10 Positions — FL-ZYJZ300

Compare 7- and 10-Position Models
| Specification | FL-ZYJZ200 | FL-ZYJZ300 |
|---|---|---|
| Fixture positions | 7, pouch configuration | 10, configured for pouch or cylindrical cells |
| Pouch cell length, including tabs | 20–200 mm | 20–280 mm |
| Pouch cell width, including gas bag | 20–150 mm | 20–250 mm |
| Maximum pouch thickness | 15 mm | 15 mm |
| Cylindrical fixtures | Not specified | 18650, 21700, 32700 or 32140 with matched fixture |
| Equipment dimensions | 600 × 380 × 700 mm | 810 × 400 × 650 mm |
| Approximate equipment weight | 90 kg | 110 kg |
Shared Technical Specifications
| Parameter | Specification |
|---|---|
| Filling sequence | Vacuum → sequential dosing with manual fixture indexing → timed standing |
| Nominal dosing accuracy | ±0.3%; verify at the target dose and with the selected liquid |
| Chamber opening height | Approx. 150 mm |
| Lateral centering travel | Up to 90 mm |
| Dispense mass | Above 0.2 g per cell; adjustable. Confirm the usable dose with the actual electrolyte. |
| Dispense speed | Nominal 3 mL/s, adjustable; maximum 6 mL/s |
| Vacuum reference | Nominally around −98 kPa gauge; confirm reference and achieved pressure for the actual cycle |
| Timers | Adjustable evacuation and vacuum standing times |
| Liquid tubing | 6 mm nominal tubing; verify fittings and wetted materials |
| Standard power input | AC 220 V / 50 Hz |
| Pneumatic supply | Dry, filtered, regulated supply above approximately 0.39 MPa (4 kgf/cm²) |
Choose the Fixture and Workflow
Seven or ten positions describe fixture capacity, not the number of simultaneous fill heads. Confirm cell dimensions including tabs and the gas bag, fill-port geometry and electrolyte compatibility. For a cylindrical process that fills first and moves the fixture to a separate vacuum standing position, compare the cylindrical cell filling and vacuum standing machine.
If the process requires only one step, compare our ceramic plunger dosing pump or standalone vacuum standing box.
Request a Quote
Provide the cell drawing, number of fixture positions, target dose, vacuum and dwell requirements, and delivery location. Confirm final power draw, vacuum pump scope and site utilities. If AC 110 V / 60 Hz is required, request configuration confirmation. For glovebox installation, confirm transfer clearances, compatible process gas and exhaust routing before ordering.
Share

Request a Lab Quote
For institutional purchase orders, non-standard configurations, larger quantities or written shipping terms, send the details below. We will reply before anything is ordered.
Product: Vacuum Electrolyte Filling and Standing Machine
SKU: FL-ZYJZ200
Browse Related Research Categories
-
Battery Separators
Compare battery separator films, membranes and pre-cut discs for laboratory cells. Options...
-
Coin Cell Components
Compare coin cell cases, spacers and springs for laboratory battery assembly. The...
-
Current Collectors & Foils
Browse current collectors and metal substrates for laboratory electrode preparation, including copper...
-
Conductive Additive
Compare conductive carbon blacks and graphite for laboratory battery electrode formulations. Grades...